|
|
| ¾º¢éÍÁÙÅ·Ñé§ËÁ´4969 ÃÒ¡Òà |
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒÂÊÓËÃѺà¤Ã×èͧ´¹µÃÕ UFH
ÂÕèËéÍ: Sonsunic
ÃËÑÊ: ET66
|
|
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒÂÊÓËÃѺà¤Ã×èͧ´¹µÃÕ UFH
T-66 Wireless Musical Instrument System
User Manual
T-66 musical instrument wireless system uses UHF frequency band (630-690MHz) to work, and can customize other UHF working frequency bands in the range of 400MHz-950MHz for foreign customers. There are 100 available working channels for receiving and transmitting audio without delay, the receiver automatically scans and selects the best channel, and through the working channel of infrared and transmitter synchronization, it can effectively guarantee that multiple sets can be used at the same time without interference. Stable working distance is more than 30 meters, using intelligent energy-saving circuit, it can work continuously for more than 10 hours. UHF band has the advantages of good signal transmission stability, wider available radio frequency bandwidth, anti-WIFI and Bluetooth interference. T-66 wireless musical instrument system, with built-in rechargeable lithium battery and battery management system, can be intuitive observation of battery power.
The transmission power is bigger than + 8dbm, RF receiving sensitivity is bigger than -95dbm, frequency response range is 20Hz-18KHz ?3db, and with built-in DSP which has three EQ options.
The background noise is very low when working, suitable for stage performances, recording, outdoor bands, personal performances, teaching and other occasions.
With user management function, when the system detects that the user has not used it within half an hour, it will automatically shut down the power supply. As to avoid the situation that the battery is short of electricity at the critical moment.
|
|
|
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒ T-68 UFH ËÑÇ XLR ÊÓËÃѺäÁ¤ì
ÂÕèËéÍ: Sonsunic
ÃËÑÊ: ET68
|
|
|
|
T-68 Wireless System
User Manual
WP-68 wireless system uses UHF frequency band (630-690MHz) to work. There are 100 available working channels for receiving and transmitting audio without delay. Stable working distance is more than 20 meters, using intelligent energy-saving circuit, it can work continuously for more than 7 hours. UHF band has the advantages of good signal transmission stability, wider available radio frequency bandwidth, anti-WIFI and Bluetooth interference. T-68 wireless system, with built-in rechargeable lithium battery and battery management system, can be intuitive observation of battery power.
The background noise is very low when working, suitable for stage performances, recording, outdoor bands, personal performances, teaching and other occasions.
With user management function, when the system detects that the user has not used it within half an hour, it will automatically shut down the power supply. As to avoid the situation that the battery is short of electricity at the critical moment.
Parameters:
Item
Transmitter
Receiver
Modulation Mode
Wide band FM
Signal Reception Mode
Single
Single
Frequency Range
630-690Mhz
Switching Bandwidth
60Mhz
Available Channels
200 Channel( new update)
Working Distance
20m Stable Working
RF Output Power
?+8dbm
Frequency Stability
10ppm
Signal-to-Noise Ratio
typ.105dB(A)rms
Total Harmonic Distortion
?0.5%
AF Freq Response
20Hz-18KHz ?3db
Max Audio Input Amplitude
1V
Receiver Sensitivity
-99 dBm
Lithium Battery Relay Time
7 hours/0V
4 hours/48V
7 hours
RF Power consumption
90 mA
Lithium Battery Capacity
800mA
Weight
32g
32g
Ambient Temperature
-10oC to +55oC
Synchronization Mode
Infrared Synchronization
Operating instructions for transmitter:
Power on/off
?Press and hold the “ POWER ”button for 1 second to turn on/off the transmitter.
48V phantom power
?In power-off state, hold the “ CH+ ”button and then press “POWER”button to switch between 0V and 48V.
?You will see “48”flash on the displayer when in 48V mode.
?You will see “0”flash on the displayer when in 0V mode.( new update)
?0V mode is applicable to dynamic mic.
48V mode is applicable to condenser mic.
Frequency selection
?In power-off state, press and hold the “ POWER ”button for 1 second to turn on the transmitter.
?At this time,
A: Hold on “ CH+ ” button and press “ POWER ” button, the frequency goes up.
B: Hold on “ CH-” button and press “ POWER ” button, the frequency goes down.
Infrared synchronization ( IR)
? For specific operation, please refer to the operating instructions of the receiver.
Power saving mode
?The transmitter will enter the power saving mode after 15 minutes without audio input.
Automatic shutdown function
?when the transmitter detects that the user has not used it within half an hour, it will automatically shut down the power supply.
Operating instructions for receiver:
Power on/off
?Press and hold the “ POWER ”button for 1 second to turn on/off the receiver.
Infrared synchronization ( IR)
?In power-on state, press the “ POWER ” button of the transmitter, The LED displays “ C---“ and emits an infrared signal.
?Put IR port of the receiver ( in the power-on state) close to the IR port of the transmitter.
?If “RF/AF” indicator flashes quickly and then lights up, infrared synchronization succeeds.
Automatic shutdown function
?when the receiver detects that the user has not used it within half an hour, it will automatically shut down the power supply.
Warn:
Keep the phantom power of the Mixer off to keep the receiver safe of the reiver. |
|
|
|
|
ÃкºäÃéÊÒÂẺ´Ô¨ÔµÑÅÊÓËÃѺ¡ÕµéÒÃì&äÇâÍÅÔ¹
ÂÕèËéÍ: Xvive
ÃËÑÊ: EU2
|
|
|
|
ÃкºäÃéÊÒÂẺ´Ô¨ÔµÑÅÊÓËÃѺ¡ÕµéÒÃì&äÇâÍÅÔ¹
Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 100 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion
Operation Guide:
1.Transmitter plugs into the Guitar (you instruments), the receiver plugs into the effects pedal, AMP, Audio, etc.
2.Turn on the Transmitter and the receiver and check the LED blue lights flashing times and make sure the blue led lights have same flashing times which means transmitter and receiver are in both same channels.
3.After connecting successfully, LED lights on receiver will keep light on.
4.Now, let’s rock together.
Specification:
Range: ?100 feet Line-0-site outdoors
Latency: <6ms
Frequency Response: 20—20KHz, +1dB/_3dB
THD+ Noise: <0.05% (1KHz@-10dbFS)
Dynamic Range: >103dB A weighted
Operating Band: 2.4GHz ISM Worldwide
Sample Range: 2.4 bit/48KHz uncompressed digital Transmission |
|
|
|
|
¢ÒµÑé§ÅÓ⾧ & µÙéáÍÁ»ì M&S ÍÅÙÁÔà¹ÕÂÁ 1 ¢Ò
ÂÕèËéÍ: M&S
ÃËÑÊ: SST06
|
|
|
|
¢ÒµÑé§ÅÓ⾧ & µÙéáÍÁ»ì M&S ÍÅÙÁÔà¹ÕÂÁ 1 ¢Ò
·Ó¨Ò¡ÍÅÙÁÔà¹ÕÂÁ ÁÕ¹éÓ˹ѡàºÒ
¢ÒµÑé§ÅÓ⾧ »ÃѺ¤ÇÒÁÊÙ§¨Ò¡ 42 – 71 ¹ÔéÇ ÃѺ¹éÓ˹ѡä´é 110 »Í¹´ì (49.9 ¡¡.) |
|
|
|
|
¢ÒµÑé§ÅÓ⾧ & µÙéáÍÁ»ì M&S ÊÕ´Ó 1 ¢Ò
ÂÕèËéÍ: M&S
ÃËÑÊ: SST07
|
|
|
|
¢ÒµÑé§ÅÓ⾧ & µÙéáÍÁ»ì M&S ÊÕ´Ó 1 ¢Ò
·Ó¨Ò¡ÍÅÙÁÔà¹ÕÂÁ ÁÕ¹éÓ˹ѡàºÒ
¢ÒµÑé§ÅÓ⾧ »ÃѺ¤ÇÒÁÊÙ§¨Ò¡ 42 – 71 ¹ÔéÇ ÃѺ¹éÓ˹ѡä´é 110 »Í¹´ì (49.9 ¡¡.) |
|
|
|
|
