|
|
| ¾º¢éÍÁÙÅ·Ñé§ËÁ´191 ÃÒ¡Òà |
|
|
ªØ´äÇÃìàÅÊà´ÕèÂÇÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Samson ÃØè¹ AirLine 77 (AF1)
ÂÕèËéÍ: Samson
ÃËÑÊ: ECMAL77
|
|
|
|
ªØ´äÇÃìàÅÊà´ÕèÂÇÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Samson ÃØè¹ AirLine 77 (AF1)
The AirLine 77 UHF Guitar System offers a true wireless experience with no beltpacks or cables, allowing total freedom of mobility. The system includes either a Fender (AF1) style transmitter that plugs into your guitar or bass, along with the CR77 receiver.
AF1 AirLine Guitar transmitters plug directly into the jack of the guitar with no cables running to a pack. AF1 plugs in at a 45-degree angle for body mounted recessed jacks. Both offer complete wireless freedom with no beltpacks and solid UHF performance.
All of the AirLine transmitters operate on inexpensive and lightweight AAA batteries that offer 14 hours of operation on a single battery.
The core of the receiver system is the CR77 true-diversity half-rack UHF receiver. It works flawlessly with all AirLine UHF transmitters. Featuring a front panel display with large multi-segment audio level and RF level LED meters, and a large rotary volume knob that allows easy adjustment of audio output, the CR77 takes all of the guesswork out making your wireless system perform.
Its synthesized PLL frequency control circuitry keeps the signal locked and true while dual tuned molded antennas with LEDs monitor the true-diversity operation. The rear panel features balanced XLR and unbalanced 1/4-inch outputs allowing flexible connection options. In addition, two CR77 receivers can be rackmounted together in a single space rack adapter available as an added accessory.
Features
-True diversity UHF wireless guitar system with PLL frequency control
-CR77 receiver features multi-segment audio level and RF level LED meters
-Squelch and volume control
-XLR and unbalanced 1/4-inch outputs with mic/line level output switch
-AF1 micro transmitter plugs directly into guitar or bass
-Transmitter features power switch, power/battery LED and 15 dB pad
-Single AAA battery operation allows up to 14 hours of life for AF1
-AC adapter and 1/4-inch to 1/4-inch cable included |
|
|
|
|
ªØ´äÇÃìàÅÊà´ÕèÂÇÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Samson ÃØè¹ AirLine 77 (AG1)
ÂÕèËéÍ: Samson
ÃËÑÊ: ECMAL78
|
|
|
|
ªØ´äÇÃìàÅÊà´ÕèÂÇÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Samson ÃØè¹ AirLine 77 (AG1)
The AirLine 77 UHF Guitar System offers a true wireless experience with no beltpacks or cables, allowing total freedom of mobility. The system includes either a Fender (AG1) style transmitter that plugs into your guitar or bass, along with the CR77 receiver.
AG1 AirLine Guitar transmitters plug directly into the jack of the guitar with no cables running to a pack. The AG1 is a 90-degree plug suitable for most popular straight angle jacks while. Both offer complete wireless freedom with no beltpacks and solid UHF performance.
All of the AirLine transmitters operate on inexpensive and lightweight AAA batteries that offer 14 hours of operation on a single battery.
The core of the receiver system is the CR77 true-diversity half-rack UHF receiver. It works flawlessly with all AirLine UHF transmitters. Featuring a front panel display with large multi-segment audio level and RF level LED meters, and a large rotary volume knob that allows easy adjustment of audio output, the CR77 takes all of the guesswork out making your wireless system perform.
Its synthesized PLL frequency control circuitry keeps the signal locked and true while dual tuned molded antennas with LEDs monitor the true-diversity operation. The rear panel features balanced XLR and unbalanced 1/4-inch outputs allowing flexible connection options. In addition, two CR77 receivers can be rackmounted together in a single space rack adapter available as an added accessory.
Features
-True diversity UHF wireless guitar system with PLL frequency control
-CR77 receiver features multi-segment audio level and RF level LED meters
-Squelch and volume control
-XLR and unbalanced 1/4-inch outputs with mic/line level output switch
-AG1 micro transmitter plugs directly into guitar or bass
-Transmitter features power switch, power/battery LED and 15 dB pad
-Single AAA battery operation allows up to 14 hours of life for AG1
-AC adapter and 1/4-inch to 1/4-inch cable included |
|
|
|
|
ªØ´¢ÂÒÂàÊÕ§äÃéÊÒÂÊÓËÃѺäÇâÍÅÔ¹ ÇÔâÍÅÒ àªÅâÅ & ¡ÕµéÒÃì ÃØè¹ LB229
ÂÕèËéÍ: Schertler
ÃËÑÊ: EWS229
|
|
|
|
ªØ´¢ÂÒÂàÊÕ§äÃéÊÒÂÊÓËÃѺäÇâÍÅÔ¹ ÇÔâÍÅÒ àªÅâÅ & ¡ÕµéÒÃì ÃØè¹ LB229
Schertler is pleased to introduce the new LB-229 Wireless instrument system. The LB-229 works perfectly with all Schertler pickups. It includes phantom power for Schertler Stat systems and all the necessary cable adaptors for any kind of possible connection (instrument, dyn, basik, vocal mic...)
SYSTEM SPECIFICATIONS:
Frequency range: UHF 740 ~ 860MHz
Frequency stabilisation: < ?30ppm
Dynamic range: >90dB
Total Harmonic Distortion: <0.5%
Frequency response: 80Hz ~18KHz ?3dB
Audio output level:
- Separate type: 0~ ?500mV
- Mix type: 0~ ?300mV
RECEIVER SPECIFICATIONS:
Power supply: DC 12V ~ 16V 400mA
Power consumption : 5W
S/N Ratio: >90dB
P/N Ratio: >80dB
F/N Ratio: >80dB
Receiving sensitivity: -95dBm
TRANSMITTER SPECIFICATIONS:
Transmitter power: 10mW
Modulation mode: Superheterodyne
Maximum deviation: ?50KHz
High harmonics: More than 40dBB (with carrier)
Battery Voltage : 2x 1.5V
Range: 100 meters |
|
|
|
|
ªØ´¢ÂÒÂàÊÕ§äÃéÊÒ 2 in 1 ÊÓËÃѺäÇâÍÅÔ¹ áÅСյéÒÃì LB230
ÂÕèËéÍ: Schertler
ÃËÑÊ: EWS230
|
|
|
|
ªØ´¢ÂÒÂàÊÕ§äÃéÊÒ 2 in 1ÊÓËÃѺäÇâÍÅÔ¹ áÅСյéÒÃì 2 ªèͧÊÑÒ ÃØè¹ LB-230U
á¶Á¿ÃÕ äÁ¤ìÅÍ 2 ªØ´ ¾ÃéÍÁªØ´ Body Pack 2 µÑÇ ÊÓËÃѺà¤Ã×èͧ´¹µÃÕ 2 ªÔé¹·Õèµéͧ¡ÒÃàÅè¹áºº Duo.
Vogue small cabinets, real UHF wireless microphones, high performance-price ratio. Easy to use, stable performance, the optimal; equipment for small performances or family used.
Product Features:
Frequency Range : UHF 720-820MHz
Frequency Stability : 30ppm
Dynamic Range : 90dB
T.H.D. : 0.5%
Frequency Response : 80Hz-18KHz (?3dB)
Audio Output:Separate:0~500mV
Audio Output:Hybrid:0~300mV |
|
|
|
|
ªØ´äÇÃìàÅÊÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Shure SLX14E-R13
ÂÕèËéÍ: Shure
ÃËÑÊ: ECMSLX14E-R13
|
|
|
|
ªØ´äÇÃìàÅÊÊÓËÃѺäÇâÍÅÔ¹/¡ÕµéÒÃì/àºÊ Shure SLX14E-R13
Instrument Wireless System
SLX1 Bodypack Transmitter
The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo.
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours continuous use
470 - 782 MHz operating range
Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")
SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
SPECIFICATIONS
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 megohm
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations) Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 AA size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Diversity Receiver
Available Options
SLX4 Diversity Receiver
SLX4L Diversity Receiver w/ Logic Output
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.
With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890.
FEATURES
SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24 MHz bandwidth
Detachable 1/4 wave antennas
Microprocessor-controlled diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
XLR and 1/4" outputs
Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)
SPECIFICATIONS
Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): -13 dBV
1/4 inch connector (into 3000 Ohm load): -2 dBV
Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12 to 18 Vdc at 150 mA, supplied by external power supply
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
|
|
|
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒÂÊÓËÃѺà¤Ã×èͧ´¹µÃÕ UFH
ÂÕèËéÍ: Sonsunic
ÃËÑÊ: ET66
|
|
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒÂÊÓËÃѺà¤Ã×èͧ´¹µÃÕ UFH
T-66 Wireless Musical Instrument System
User Manual
T-66 musical instrument wireless system uses UHF frequency band (630-690MHz) to work, and can customize other UHF working frequency bands in the range of 400MHz-950MHz for foreign customers. There are 100 available working channels for receiving and transmitting audio without delay, the receiver automatically scans and selects the best channel, and through the working channel of infrared and transmitter synchronization, it can effectively guarantee that multiple sets can be used at the same time without interference. Stable working distance is more than 30 meters, using intelligent energy-saving circuit, it can work continuously for more than 10 hours. UHF band has the advantages of good signal transmission stability, wider available radio frequency bandwidth, anti-WIFI and Bluetooth interference. T-66 wireless musical instrument system, with built-in rechargeable lithium battery and battery management system, can be intuitive observation of battery power.
The transmission power is bigger than + 8dbm, RF receiving sensitivity is bigger than -95dbm, frequency response range is 20Hz-18KHz ?3db, and with built-in DSP which has three EQ options.
The background noise is very low when working, suitable for stage performances, recording, outdoor bands, personal performances, teaching and other occasions.
With user management function, when the system detects that the user has not used it within half an hour, it will automatically shut down the power supply. As to avoid the situation that the battery is short of electricity at the critical moment.
|
|
|
|
|
ªØ´á»Å§ÊÑÒ³äÃéÊÒ T-68 UFH ËÑÇ XLR ÊÓËÃѺäÁ¤ì
ÂÕèËéÍ: Sonsunic
ÃËÑÊ: ET68
|
|
|
|
T-68 Wireless System
User Manual
WP-68 wireless system uses UHF frequency band (630-690MHz) to work. There are 100 available working channels for receiving and transmitting audio without delay. Stable working distance is more than 20 meters, using intelligent energy-saving circuit, it can work continuously for more than 7 hours. UHF band has the advantages of good signal transmission stability, wider available radio frequency bandwidth, anti-WIFI and Bluetooth interference. T-68 wireless system, with built-in rechargeable lithium battery and battery management system, can be intuitive observation of battery power.
The background noise is very low when working, suitable for stage performances, recording, outdoor bands, personal performances, teaching and other occasions.
With user management function, when the system detects that the user has not used it within half an hour, it will automatically shut down the power supply. As to avoid the situation that the battery is short of electricity at the critical moment.
Parameters:
Item
Transmitter
Receiver
Modulation Mode
Wide band FM
Signal Reception Mode
Single
Single
Frequency Range
630-690Mhz
Switching Bandwidth
60Mhz
Available Channels
200 Channel( new update)
Working Distance
20m Stable Working
RF Output Power
?+8dbm
Frequency Stability
10ppm
Signal-to-Noise Ratio
typ.105dB(A)rms
Total Harmonic Distortion
?0.5%
AF Freq Response
20Hz-18KHz ?3db
Max Audio Input Amplitude
1V
Receiver Sensitivity
-99 dBm
Lithium Battery Relay Time
7 hours/0V
4 hours/48V
7 hours
RF Power consumption
90 mA
Lithium Battery Capacity
800mA
Weight
32g
32g
Ambient Temperature
-10oC to +55oC
Synchronization Mode
Infrared Synchronization
Operating instructions for transmitter:
Power on/off
?Press and hold the “ POWER ”button for 1 second to turn on/off the transmitter.
48V phantom power
?In power-off state, hold the “ CH+ ”button and then press “POWER”button to switch between 0V and 48V.
?You will see “48”flash on the displayer when in 48V mode.
?You will see “0”flash on the displayer when in 0V mode.( new update)
?0V mode is applicable to dynamic mic.
48V mode is applicable to condenser mic.
Frequency selection
?In power-off state, press and hold the “ POWER ”button for 1 second to turn on the transmitter.
?At this time,
A: Hold on “ CH+ ” button and press “ POWER ” button, the frequency goes up.
B: Hold on “ CH-” button and press “ POWER ” button, the frequency goes down.
Infrared synchronization ( IR)
? For specific operation, please refer to the operating instructions of the receiver.
Power saving mode
?The transmitter will enter the power saving mode after 15 minutes without audio input.
Automatic shutdown function
?when the transmitter detects that the user has not used it within half an hour, it will automatically shut down the power supply.
Operating instructions for receiver:
Power on/off
?Press and hold the “ POWER ”button for 1 second to turn on/off the receiver.
Infrared synchronization ( IR)
?In power-on state, press the “ POWER ” button of the transmitter, The LED displays “ C---“ and emits an infrared signal.
?Put IR port of the receiver ( in the power-on state) close to the IR port of the transmitter.
?If “RF/AF” indicator flashes quickly and then lights up, infrared synchronization succeeds.
Automatic shutdown function
?when the receiver detects that the user has not used it within half an hour, it will automatically shut down the power supply.
Warn:
Keep the phantom power of the Mixer off to keep the receiver safe of the reiver. |
|
|
|
|
ÃкºäÃéÊÒÂẺ´Ô¨ÔµÑÅÊÓËÃѺ¡ÕµéÒÃì&äÇâÍÅÔ¹
ÂÕèËéÍ: Xvive
ÃËÑÊ: EU2
|
|
|
|
ÃкºäÃéÊÒÂẺ´Ô¨ÔµÑÅÊÓËÃѺ¡ÕµéÒÃì&äÇâÍÅÔ¹
Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 100 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion
Operation Guide:
1.Transmitter plugs into the Guitar (you instruments), the receiver plugs into the effects pedal, AMP, Audio, etc.
2.Turn on the Transmitter and the receiver and check the LED blue lights flashing times and make sure the blue led lights have same flashing times which means transmitter and receiver are in both same channels.
3.After connecting successfully, LED lights on receiver will keep light on.
4.Now, let’s rock together.
Specification:
Range: ?100 feet Line-0-site outdoors
Latency: <6ms
Frequency Response: 20—20KHz, +1dB/_3dB
THD+ Noise: <0.05% (1KHz@-10dbFS)
Dynamic Range: >103dB A weighted
Operating Band: 2.4GHz ISM Worldwide
Sample Range: 2.4 bit/48KHz uncompressed digital Transmission |
|
|
|
|
Belkin ÊÒÂÊÑÒ³ RCA Stereo Cable F3Y116qe to 3.5 mm. 2 àÁµÃ
ÂÕèËéÍ: Belkin
ÃËÑÊ: EAU01
|
|
|
|
ÊÒÂÊÑÒ³RCA Stereo cable F3Y116qe to 3.5 mm. Belkin
Black (Gold Plated) 2 àÁµÃ
Essential Stereo RCA to 3.5mm Audio Cable 2M
Brand Name: Belkin
Cable Length: 2 m
Cable Type: Mini-phone/RCA
Connector on First End: 2 x RCA Male Stereo Audio
Connector on Second End: 1 x Mini-phone Male Stereo Audio
Product Type: Audio Cable |
|
|
|
|
