|
|
| ¾º¢éÍÁÙÅ·Ñé§ËÁ´4781 ÃÒ¡Òà |
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺäÇâÍÅÔ¹ & ÇÔâÍÅÒ DYN-V-P48
ÂÕèËéÍ: Schertler
ÃËÑÊ: EPV10
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺäÇâÍÅÔ¹ & ÇÔâÍÅÒ DYN-V-P48
Schertler’s new DYN-V-P48 is a fully balanced, active, dynamic contact microphone with Class A electronics. Specially designed to enhance the natural qualities of the violin and viola in both amplified and recording environments, the microphone features state-of-the-art, in-house developed activefiltering technology that has enabled it to be precisely matched to the instruments’ sound characteristics. This leads to more “immediate” results for the user, making it possible to achieve amazing sound with only minimal adjustments required.
The DYN-V-P48 has a new sleek, lightweight design, making it even less obtrusive to the player. The microphone is supplied with Schertler’s own customized cable that is both robust and torsion resistant, designed to withstand the rigours of daily use while delivering best possible performance results. A balanced XLR connector enables direct connection to a microphone input on a mixing console, as well as to a full range amplification system.
The DYN-V-P48 can be easily and safely applied to even the most valuable of instruments using special adhesive putty. It can also be quickly transferred between instruments during performances or recording sessions. Note: This microphone requires 48V phantom power.
Schertler’s flagship DYN Series contact microphones were first launched over 20 years ago. Two decades later, developments in microphone technology have enabled the series to be re-engineered to meet today’s exacting requirements. The new DYN P48 Series retains the best features from the original DYN microphones while incorporating state-of-the-art technology that has resulted ineven better sound quality,a more elegant lightweight design and more user-friendly operation.
Technical Specifications
Output impedance 4.7 Kohm @ 1 KHz
Frequency Response 20 Hz to 20 kHz
Dynamic range 139 dB, 145 dB typical
Sensitivity (on instrument) ca. -30 dB
Sensitivity (theoretical) -62 dB/@ 1um ampl.
Mechanical decoupling Butterworth 2nd order, Q=6
Temperature range -20? C to +70? C
Minimum operating voltage 22 VDC
Active EQ Customized for each instrument
Electronics all Class-A
Contacts All hard gold plated 0.5 mm
Connection XLR balanced + Binder |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺà¤Ã×èͧÊÒ Schertler ÃØè¹ BASIK
ÂÕèËéÍ: Schertler
ÃËÑÊ: EPV11
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺà¤Ã×èͧÊÒ Schertler ÃØè¹ BASIK ÊÓËÃѺà¤Ã×èͧ´¹µÃÕͤÙʵԡ ¨Ò¡»ÃÐà·ÈÊÇÔµà«ÍÃìᏴì
Contact microphone can be plugged in any amplifier through the phantom power adapter box supplied with a 1.5V AA battery.
5 à˵ؼÅÊÓËÃѺ¡ÒõѴÊÔ¹ã¨
1. ·Ñé§ËÁ´à»ç¹à·¤â¹âÅÂÕè contact microphone
2. µÔ´µÑ駧èÒ áÅÐÊÒÁÒöÂéÒ¨ҡà¤Ã×èͧ´¹µÃÕ˹Öè§ä»ÍÕà¤Ã×èͧ˹Öè§ä´é§èÒÂ
3. ãËéàÊÕ§·Õèà»ç¹¸ÃÃÁªÒµÔ
4. ÃÒ¤ÒäÁèᾧ
5. äÁèÁÕàÊÕ§ú¡Ç¹ áÅÐàÊÕ§·Õèá¢ç§¨Ò¡ piezo |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹SH940
ÂÕèËéÍ: Shadow
ÃËÑÊ: EPV01
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH940 ¨Ò¡»ÃÐà·ÈàÂÍÃÁѹ à»ç¹»Ô¤ÍѾ·Õè½Ñè§Å§ã¹ËÂèͧäÇâÍÅÔ¹ ÁÒ¾ÃéÍÁ¡Ñº¾ÃÕáÍÁ»ì ÊÒÁÒö»ÃѺ´Ñ§àºÒ áÅÐTone ä´é ¼ÙéãªéÍÒ¨µéͧ»ÃѺáµè§ËÂèͧ¡è͹¡ÒÃãªé§Ò¹
|
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH 945 NFX-V
ÂÕèËéÍ: Shadow
ÃËÑÊ: EPV02
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH 945 NFX-V ¨Ò¡»ÃÐà·ÈàÂÍÃÁѹ
ÁÒ¾ÃéÍÁ෤ⴹâÅÂÕ Nano-flex ¾ÃéÍÁªØ´¾ÃÕáÍÁ»ìÊÒÁÒö»ÃѺ¤ÇÒÁ´Ñ§áÅÐàÊÕ§ÊÙ§àÊÕ§µèÓä´é µÔ´µÑ駧èÒ SH 945 NFX-V à»ç¹ÍØ»¡Ã³ì¢ÂÒÂàÊÕ§·ÕèÁդسÀÒ¾ÊÙ§áÅÐãËéàÊÕ§·Õèà»ç¹¸ÃÃÁªÒµÔ¢Í§äÇâÍÅÔ¹ÊÙ§ÁÒ¡ |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH 941
ÂÕèËéÍ: Shadow
ÃËÑÊ: EPV03
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH 941 ¨Ò¡»ÃÐà·ÈàÂÍÃÁѹ
Twin Bridge Pickups SH 941SH 941 is a very natural sounding pickup for violin. It features an attached output socket and 12' (4m) shielded instrument cable.
* Double bridge pickup for violin
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend an amplifier with low impedance input.
* Easy installation,
* Incl. 12' (4m) shielded instrument cable
|
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH SV2
ÂÕèËéÍ: Shadow
ÃËÑÊ: EPV05
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§äÇâÍÅÔ¹ & ÇÔâÍÅÒ Shadow ÃØè¹ SH SV2 ¨Ò¡»ÃÐà·ÈàÂÍÃÁѹ
The sensors of the SH SV2 mount either between the wings and the feet of the bridge or between the feet and the instrument's top. With this choice of installation the musician gets another opportunity to influence its tone.
Easy and quick installation. Includes an attached 1/4” (6.3mm) output socket.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend an amplifier with low impedance input. |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺàªÅâÅ Realist
ÂÕèËéÍ: Realist
ÃËÑÊ: EPC02
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§ÊÓËÃѺàªÅâÅ Realist ¨Ò¡»ÃÐà·ÈÊËÃÑ°ÍàÁÃÔ¡Ò
It's acoustic transducer was designed by Ned Steinberger in collaboration with David Gage.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend an amplifier with low impedance input. |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§àªÅâÅ Realist ÃØè¹ Sound Clip
ÂÕèËéÍ: Realist
ÃËÑÊ: EPC03
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§àªÅâÅ Realist ÃØè¹ Sound Clip ¨Ò¡»ÃÐà·ÈÊËÃÑ°ÍàÁÃÔ¡Ò
The Realist SoundClip is the newest innovation from Ned Steinberger and David Gage.
The Realist SoundClip clamps easily on to the bridge of any string bass, without marking or damaging. Clamping allows it to be added to or removed from any bass, at any time without hassle. Great for travelling bassists or for those who want a pick-up only when they are using an amp
The SoundClip sports features that are not found on any other pick-up. The on-board volume knob gives the player full control to adjust output on the spot. Innovative variable weight system helps you contour tone. The SoundClip is fully adaptable to all basses and playing situations. |
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§àªÅâÅ Schertler ÃØè¹ DYN-C-Set
ÂÕèËéÍ: Schertler
ÃËÑÊ: EPC04
|
|
|
|
µÑÇ¢ÂÒÂàÊÕ§àªÅâÅ Schertler ÃØè¹ DYN-C-Set ¨Ò¡»ÃÐà·ÈÊÇÔµà«ÍÃìᏴì
DYN-C is designed to reproduce the natural sound of the ‘cello in a moderately loud environment. This makes it a popular choice with sound engineers for both orchestral miking and studio recording.
Easily and safely fitted to the body of the ‘cello, using special adhesive putty, the sensor can be appropriately positioned to capture the best tonal qualities of the instrument. It can also be easily moved from one instrument to another.
DYN-C is fitted with an XLR connector, enabling direct connection into a microphone input on a mixing desk.
It also works effectively through full-range amplification systems such as the Schertler amplifier series.
- accessories here
- manuals here
For all cello players: We recommend you use Velvet Strings to obtain best possible performance in addition to Schertler
TECHNICAL SPECIFICATIONS
mechanical decoupling butterworth 2nd order, Q=0.6
nominal impedance 1500 ohm / 1000 Hz
frequency response 40 Hz to 18 kHz (+/-3dB)
equivalent output noise 139dB - 145dB typical
sensitivity 20mV/g
sensitivity (on instrument) ca. -28dBu
tmperature range -20?C to +70?C
contacts all hard gold 0.5um plated
connection chinch to XLR balanced
cable length 1m (40 in) |
|
|
|
|
»Ô¤ÍѾ¢ÂÒÂÊÓËÃѺàªÅâÅ Schertler STAT-C-SET
ÂÕèËéÍ: Schertler
ÃËÑÊ: EPC07
|
|
|
|
»Ô¤ÍѾ¢ÂÒÂÊÓËÃѺàªÅâÅ Schertler STAT-C-SET ¨Ò¡»ÃÐà·ÈÊÇÔÊà«ÍÃìᏴì ÁÒ¾ÃéÍÁ¡Ñº pickup, ÊÒ cable áÅÐ battery - powered ÃèÇÁ·Ñé§ STAT-PRE preamp with volume control.
Schertler’s bridge-mounted STAT-C sensor is perfect for cellists performing in loud musical environments. Specially designed to bring out the richness of the instrument’s lower register, it also produces clarity in the higher ranges.
STAT-C is remarkable for its high resistance to feedback, making it an ideal system for rock, jazz or fusion performances with high levels of amplification. It also works very effectively with signal processors and effects units.
The standard STAT-C SET includes pickup, cable and battery- powered STAT-PRE preamp with volume control. The STAT-C-PRO includes the sophisticated YELLOW SINGLE preamp, while the STAT-C-ROAD includes Schertler’s flagship YELLOW BLENDER. Both preamps come with regulated AC power supply. They also let the player control parameters such as gain, bass, treble, resonance, and more
TECHNICAL SPECIFICATIONS
nominal impedance 1.6 kOhm
frequency response 20 Hz to 12 kHz
dynamic range 75 dB
sensitivity (on instrument) ca. -25dB
temperature range -10?C to +50?C
contacts all gold plated
connection chinch (RCA) to 1/4" jack |
|
|
|
|
